Videos 1 - 10 of 1255 Videos

KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol Field Test Review

www.ReplicaAirguns.com Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model: KP-13 TBC. Materials: Metal & Polymer. Weight: 1.7 pounds (770 grams). Total Length: 8.25 inches (210mm) Barrel: 3.7 inches (95mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 22 round drop out full size metal magazine. FPS: Claimed 360+. All in all the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol did a good job once I took the broken off threads out of the barrel. The trigger is really nice on it, maybe even a bit light but you will get use to it over time. The blowback is snappy and the gun holds well in the hand, a real pleasure to shoot! I did notice the slide spring feels a bit weak when you release it as it does not snap into place with a lot of authority, but this does not effect the blowback action at all and the gun shot without any problems or hiccups. If you are looking for a quality Glock styled Airsoft Pistol then the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol would make a great option for sure. Read post: www.replicaairguns.com/posts/2025/4/15/kjworks-kp-13-tbc-co2-blowback-airsoft-pistol-field-test-review Buy the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol in Canada: https://www.replicaairguns.ca/kj-works-kp-13-tbc-airsoft-pistol Buy GBB Airsoft Pistols in the US: https://www.replicaairguns.us/airsoft-pistols

Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver Field Test Review

www.ReplicaAirguns.com Type: Revolver CO2 Airsoft Pistol. Manufacturer: Distributed by Umarex. Model: Smith & Wesson 629 Competitor. Materials: Mostly all Metal. Weight: 3.3 pounds (1.55 kg). Total Length: 12 inches (30.5cm) Barrel: 6 inches (15cm) metal non-rifled. Propulsion: CO2 x 1. Action: Revolver, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 6 round cylinder. Velocity: Claimed 500fps. Comments: All in all the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is one of the nicest shell loading Airsoft Revolvers I have reviewed, and I do hope that one day it is available in a Steel BB version. I do recommend for sure using heavier Airsoft BB for better accuracy, and again if you are a smaller person or young adult, this Revolver may be a bit chunky at around 3 pounds. The single action trigger is very usable for precise shot placement, but I would say it is not overly light. Of course you can shoot double action if you want to unload the 6 rounds quickly when action shooting. I do like that Umarex has gone with larger shells and a beefier cylinder which is a lot closer to what your would expect from a 44 magnum in terms of shell casing size. If you want the ultimate Shell Loading Airsoft Revolver than this one is for sure on the top of the list! Read post: www.replicaairguns.com/posts/2025/4/11/umarex-smith-amp-wesson-629-competitor-co2-airsoft-revolver-field-test-review Buy the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in Canada: https://www.replicaairguns.ca/umarex-smith-wesson-629-co2-airsoft-pistol Buy the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in the US:https://www.replicaairguns.us/umarex-smith-wesson-629-co2-airsoft-pistol

HoverAir X1 ProMax with Beacon and Controllers - Initial Thoughts and Flights

www.ReplicaAirguns.com I am making this video for both my channels (GetFitOver40 & Replica Airguns) since I will be using the HoverAir X1 ProMax in my Video making process to capture video in a way that only an AI Drone can. I do like to share with my audiences some of the tech I use behind the scenes to make the videos a bit more interesting. There is a ton to talk about and show when it comes to the HoverAir X1 ProMax which is why this video is a bit on the longer side. I really wanted to talk about what I like about this amazing flying video system, and of course show the super high quality video it takes. The purpose of this video is not so much to go over all the specifications and details, or to compare it to other similar products, but rather to go over what I like about it, and why I decided to get one for myself. About a year ago I ordered the HoverAir X1 Pro when it was being crowdfunded, but I backed out of my order when the DJI Neo came out, mainly because the DJI Neo was first to market, and it can also fly in true FPV mode which really appealed to me. I am glad I got the Neo as it has been so much fun, and will be keeping it mainly for its FPV flying and versatility. Why did I decide to get myself the HoverAir X1 ProMax? There is really nothing out there right now that can take as high quality video (8k) in such a small and portable package. I love the AI flying modes but it is also nice you can use the Beacon with the Joysticks to control it just like a regular Drone. For me it was the ultra high video quality, the faster tracking speeds, and the ability to use it like a standard drone since all my other drones are more or less FPV drones. Oh yah, I also got a crazy deal on it over on Marketplace (About half price). Buy Replica Airguns in Canada: https://www.replicaairguns.ca/ Buy Replica Airguns in the US: https://www.replicaairguns.us/

Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver Table Top Review

www.ReplicaAirguns.com Type: Revolver CO2 Airsoft Pistol. Manufacturer: Distributed by Umarex. Model: Smith & Wesson 629 Competitor. Materials: Mostly all Metal. Weight: 3.3 pounds (1.55 kg). Total Length: 12 inches (30.5cm) Barrel: 6 inches (15cm) metal non-rifled. Propulsion: CO2 x 1. Action: Revolver, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 6 round cylinder. Velocity: Claimed 500fps. Comments: The Beretta M9 is a classic Semi Auto Pistol that has been used in military and I think my main takeaway for the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is that Umarex has a new larger shell and cylinder design, which is closer to the actual shell and cylinder size of a .44 magnum, so maybe we will see this design coming out in future shell loading revolvers. Other noticeable features are for sure the size and weight of this beast. If you add a red dot or optical sight to it, then this Airsoft revolver could weigh in at nearly 4 pounds! If you want the ultimate shell loading revolver than this is probably going to be the choice to go with, unless you want it in 4.5mm steel BB or Pellet versions as at least for right now, it is only available in an Airsoft version, maybe that will change down the road… Read post: www.replicaairguns.com/posts/2025/4/2/umarex-smith-amp-wesson-629-competitor-co2-airsoft-revolver-table-top-review Buy the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in Canada: https://www.replicaairguns.ca/umarex-smith-wesson-629-co2-airsoft-pistol Buy the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in the US:https://www.replicaairguns.us/umarex-smith-wesson-629-co2-airsoft-pistol

March 2025 Mystery Box Unboxing Preview

www.ReplicaAirguns.com In this Mystery Box Unboxing Video I take a look at three Airsoft products, two pistols from Umarex and two AEG Airsoft Rifles from Specna Arms. As this is essentially an Unboxing Preview Video, I don’t go into a lot of detail for each item as this is my first real exposure to these items for the most part. I will be making full Table Top and Field Test Video for each item once I get to know them a bit better and share all the specifications and features along with shooting performance. Starting with the Umarex products, I did get the chance to checkout the Umarex Smith & Wesson 629 CO2 Airsoft Revolver at this years SHOT Show, and it is a very solid shell loading 44 Magnum styled Revolver with full Smith and Wesson licensing. From what I remember this item may only come in the Airsoft version at the time of this review and it does have a claimed velocity of 500 which may be a bit hot for Airsoft games but it would be a lot of fun shooting at pop cans and the likes. The second Umarex products is a pretty basic mostly clear plastic Spring Powered Beretta 92 FS Airsoft Pistol. It is fairly light weight with it’s mostly all plastic construction and the velocity is also on the lower side at only around 250 fps. Since it is distributed by Umarex it carries the Beretta licensing which is nice and all, but on a clear plastic gun I am not sure if is really a major feature. The first Airsoft Rifle out of the Mystery Box was the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle which is your standard AR configuration, mine was the shorter barrel version but it does come in a longer barrel version as well. The top and bottom receiver and most of the outer components are going to be Nylon Fiber Reinforced Plastic. It does include features like Rotational Hop Up Chamber, SA ETU™ Optical Electronic System Optimizes for improved trigger response and Quick Spring Change System to name a few. Something I don’t see too often are Pink Assault Rifles! So it was nice to get the pink version of the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle. It does come in a Black and Tan version along with an all Black configuration. It’s really a great looking AEG Airsoft Rifle in any color you decide to go with, and I like the compact feel it has with lots of options for mounting accessories on the top bottom and side rails. You can get going right away using the included pop-up front and rear sights or throw a red dot or optical sight on it. Buy the Umarex Smith & Wesson 629 CO2 Airsoft Revolver: https://www.replicaairguns.ca/umarex-smith-wesson-629-co2-airsoft-pistol Buy the Spring Powered Beretta 92 FS Airsoft Pistol: https://www.replicaairguns.ca/beretta-92-fs-spring-clear Buy the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle: https://www.replicaairguns.ca/specna-arms-sa-flex-high-speed-aeg Buy the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle: https://www.replicaairguns.ca/specna-arms-sa-fx02-flex-hal-etu-aeg

KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol Table Top Review

www.ReplicaAirguns.com Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model: M9A1 TBC. Materials: Mostly all Metal. Weight: 2.1 pounds (926 grams). Total Length: 9.25 inches (23.5cm) Barrel: 4 inches (10.2cm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 24 round drop out full size metal magazine. FPS: Claimed 360+. Comments: The Beretta M9 is a classic Semi Auto Pistol that has been used in military and police for decades and has proven itself over time. I would say it is right up there with the classic 1911 as being recognized as a dependable and solid semi auto pistol. I still kind of prefer the 1911 but I’d take a Beretta M9A1 any day of the week. You really can’t go too wrong with the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it has it all… Almost all metal build, full blowback operation with both single and double action shooting options. You have a picatinny rail for adding accessories and easy to see white dot sights front and back. This is probably one of my favorite Beretta M9’s in terms of looks and features. Read post: www.replicaairguns.com/posts/2025/3/25/kjworks-m9a1-tbc-co2-blowback-airsoft-pistol-table-top-review Buy the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol in Canada: https://www.replicaairguns.ca/kj-works-m9a1-tbc-blowback-gun Buy GBB Airsoft Pistols in the US: https://www.replicaairguns.us/airsoft-pistols

KJWorks KP-19 CO2 Blowback Airsoft Pistol Table Top Review

www.ReplicaAirguns.com Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model: KP-19. Materials: Mostly all Metal. Weight: 1.9 pounds (850 grams). Total Length: 10.6 inches (270mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 25 round drop out full size metal magazine. FPS: Claimed 360+. Comments: I’ve mentioned in many of my videos how I really like 1911 styled pistols and of course ones with full blowback operation, so the KJWorks KP-19 CO2 Blowback Airsoft Pistol for me is a winner even before I even try it. Of course how it performs is going to be the real deciding factor, even if I am rooting for it. What is not to like though? It is almost all metal, has full blowback operation, easy to see fiver optic sights front and back, the ability to add a laser or tac light up front with a red dot on the back by installing the adaptor plate so you can really dress this one up and make it your own at the end of the day. Read post: www.replicaairguns.com/posts/2025/3/21/kjworks-kp-19-co2-blowback-airsoft-pistol-table-top-review Buy the KJWorks KP-19 CO2 Blowback Airsoft Pistol in Canada: https://www.replicaairguns.ca/kj-works-kp-13-tbc-airsoft-pistol Buy GBB Airsoft Pistols in the US: https://www.replicaairguns.us/airsoft-pistols

KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol Table Top Review

www.ReplicaAirguns.com Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model: KP-13 TBC. Materials: Metal & Polymer. Weight: 1.7 pounds (770 grams). Total Length: 8.25 inches (210mm) Barrel: 3.7 inches (95mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 22 round drop out full size metal magazine. FPS: Claimed 360+. Let’s be clear, the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not a Glock Replica. It is different in many ways, the idea here is that it is close enough to be a good alternative if you are use to shooting Glocks and want something to train with that looks, feels and functions a lot like a traditional Glock. I am hoping the TBC version performs as well as the non-TBC version shot for me when I made my original Field Test Shooting Video back in 2023. For me the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol checks all the boxes… Full blowback operation, a very good trigger, lots of realism and I am sure good performance based on my past review. Read post: https://www.replicaairguns.com/posts/2025/3/20/kjworks-kp-13-tbc-co2-blowback-airsoft-pistol-table-top-review Buy the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol in Canada: https://www.replicaairguns.ca/kj-works-kp-13-tbc-airsoft-pistol Buy GBB Airsoft Pistols in the US: https://www.replicaairguns.us/airsoft-pistols

Novritsch SSR77 AEG Airsoft Rifle Table Top Review

www.replicaairguns.com Type: Airsoft AEG Rifle. Manufacturer: Novritsch. Model: SSR77. Materials: Metal and plastic. Weight: 7.72 pounds (3.5 kg). Total Length: 33 inches (85cm). Barrel Length: 20 inches (51cm). Barrel: Metal non-rifled. Propulsion: AEG. Action: Semi and full auto single action only two stage trigger. Hop-up: Adjustable hop-up via ejection port. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 180 round full size drop out transparent plastic magazine. FPS: 400. Personally I do not like the look of the Steyr AUG but it is growing on me a little bit. Practically speaking it is a really well thought out riffle using the bullpup design to keep it short even with a longer 20 inch barrel. It is also nice that the 3x optical scope is built into the deign of the Novritsch SSR77 AEG Airsoft Rifle so you are all setup but if you want something like a red dot or maybe higher powered scope your options are going to be very limited. The two stage trigger setup is really cool, you can shoot in either semi or full auto just by how you press the trigger rather than having to change between the two options like most semi and full auto rifles. Some other positives are the see through magazine, the quick spring change system, being sling ready and the ability to shorten the gun up significantly for transport by removing the barrel. A very unique AEG Airsoft Rifle for sure. Read my full written review here: www.replicaairguns.com/posts/ Buy the Novritsch SSR77 AEG Airsoft Rifle in Canada: https://www.replicaairguns.ca/novritsch-ssr77-airsoft-aeg-rifle Buy Novritsch Products in the US: https://www.replicaairguns.us/novritsch

Novritsch SSQ22 GBB Airsoft Rifle Table Top Review

www.replicaairguns.com Type: Airsoft GBB Rifle. Manufacturer: Novritsch. Model: SSQ22. Materials: Metal and plastic. Weight: 4 pounds (1.8 kg). Total Length: 32.7 inches (83cm). Barrel Length: 14.6 inches (37cm). Barrel: Metal non-rifled. Propulsion: Green gas. Action: Semi auto single action only trigger. Hop-up: Adjustable top mount hop-up. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 36 round full size drop out plastic/metal magazine. FPS: 400+. I am always a sucker for Gas Blowback Airguns in general and with Airsoft Rifles the vast majority tend to be AEG’s, so when I get the chance to review a GBB Airsoft rifle, I am always a bit excited to do so. The Novritsch SSQ22 GBB Airsoft Rifle has a lot going for it, there are lots of metal parts where you want them to be, a great single action trigger, mounting options for a red dot or optical sight along with M-LOK on the sides and bottom for whatever accessories you plan to add to it. It’s nice that it starts out pretty light as the addition of a scope, perhaps a foregrip, maybe a taclight and or laser will bring up the weight. I most certainly am looking forward to the Field Test Shooting Video so I can see how this one performs. Read my full written review here: www.replicaairguns.com/posts/2025/3/14/novritsch-ssq22-gbb-airsoft-rifle-table-top-review Buy the Novritsch SSQ22 GBB Airsoft Rifle in Canada: https://www.replicaairguns.ca/novritsch-ssq22-blowback-airsoft-rifle Buy Novritsch Products in the US: https://www.replicaairguns.us/novritsch